1/2/4 Channel DMX to PWM LED Tape Driver

Provides four controllable PWM outputs for controlling LED loads connected with common anodes to a single supply

• Description

  • Provides 500Hz PWM control for four channels of constant voltage LED lighting
  • Individual overcurrent and short circuit protection on each output
  • Full DMX addressing range
  • One, two or four decoded DMX addresses control the outputs
  • Standard RJ45 DMX In and Through connectors
  • +5V power on DMX In connector to power Anyscenes, AMD4, Anycolour etc.
  • Phased PWM outputs reduce peak loading on power supplies when dimming 16 bit dimming provides smooth stepless dimming and selectable linear and square law dimming laws
  • Selectable fast (~5Hz) and slow (~1Hz) responses
  • Synchronised outputs for higher current rating circuits
  • DMX data hold on DMX disconnection

   

  For a comprehensive data sheet and operating instructions go to the downloads tab.

• Basic Specifications

  Weight: 0.3kg

  Dimensions: (L x W x H ): 158mm (including 2 x 13mm flanges) x 70mm x 25mm

  Operating Voltage: 12-24V dc with power supply matched to load circuits

  Outputs:

  • Four PWM controlled outputs for common anode LED connection
  • Outputs rated and protected to 5A rating per channel
  • RJ45 ‘Data in’ connector provides +5V, 100mA dc supply

   

   

   

• Downloads

  PDF Downloads

  Sales Leaflet >>

  Operating Instructions >>

   

Dimming LED Driver Constant Current

A range of 9 W to 30 W LED constant current cool running drivers for indoor dimming

• Description

  • Fixed constant current output
  • IP rating: IP20 indoor
  • Control: single output, mains on/off + dimmable via leading edge or trailing edge dimmers
  • Short circuit protection
  • Over voltage protection
  • Over temperature protection
  • Hard wired via screw terminals
  • Suitable for Class I,II & III luminaires
  • Linear in line enclosure
  • Warranty: 2 years
  • CAUTION: DO NOT HOT WIRE, ensure all connections to driver are in place before powering up

   

  For a comprehensive data sheet and operating instructions go to the downloads tab.

• Basic Specifications

  DRIVER

  CODE

  LEDCC1

  LEDCC2

  LEDCC3

  LEDCC4

  LEDCC5

  LEDCC6

  LEDCC7

  LEDCC8

  LEDCC9

  LEDCC10

  LEDCC11

  LEDCC12

   

  INPUT VOLTAGE

  220-240 Vac 50/60 Hz

  198-264 Vac 50/60 Hz

  220-240 Vac 50/60 Hz

  198-264 Vac 50/60 Hz

  198-264 Vac 50/60 Hz

  220-240 Vac 50/60 Hz

  198-264 Vac 50/60 Hz

  198-264 Vac 50/60 Hz

  198-264 Vac 50/60 Hz

  220-240 Vac 50/60 Hz

  198-264 Vac 50/60 Hz

  198-264 Vac 50/60 Hz

  OUTPUT

  MAX. W

  9 W

  12 W

  18 W

  20 W

  30 W

  18 W

  15 W

  20 W

  12 W

  18 W

  20 W

  30 W

  OUTPUT

  mA

  350 mA

  350 mA

  350 mA

  350 mA

  350 mA

  450 mA

  500 mA

  500 mA

  700 mA

  700 mA

  700 mA

  700 mA

  DIMMS

  LxWxH mm

  113x44x28

  123x45x19

  113x44x28

  123x45x19

  153x41x32

  113x44x28

  123x45x19

  123x45x19

  123x45x19

  113x44x28

  123x14x19

  153x41x32

• Downloads

  PDF Downloads

  Sales Leaflet >> Contact Anytronics

  Operating Instructions >> Contact Anytronics

   

Dimming LED Driver Constant Voltage

Seamless dimming, cool running LED dimmable drivers for indoor use

• Description

  • Complete with fixing accessories
  • Constructed from polycarbonate
  • Complete with LED driver
  • Not suitable for use with a dimmer switch

   

  For a comprehensive data sheet and operating instructions go to the downloads tab.

• Basic Specifications

  Weight: ? kg

  Dimensions: (L x W x H ): ?

  Primary Input: 100-240 V ~ 50/60 Hz 0.56 A

  Secondary Output: 1.5 A, 24 V dc

   

• Downloads

  PDF Downloads

  Sales Leaflet >> Contact Anytronics

  Operating Instructions >> Contact Anytronics