DP102TE

Anytronics stand alone single channel trailing edge dimming pack suitable for LED loads.

• Description

  • Compact wall mounted design
  • Mains on / off rocker switch
  • 45mm slider control
  • Very low minimum load
  • Dimming Range selection: 1 to 100% or
  • Load resistor mounting position, may be required for certain loads
  • Plug in terminal block for all connections
  • Rear enclosure mounted direct to wall surface
  • Cable entries via 20mm knock outs on all rear surfaces
  • Trailing Edge dimming giving silent dimming control

   

  For a comprehensive data sheet and operating instructions go to the downloads tab.

• Basic Specifications

  Supply:

  Operating voltage Nominal 200-240Vac, 50/60Hz

  Cable Entry:

  Via 20mm knockouts total number 5, one on each rear enclosure face. 20mm cable accessories not included

  Connections:

  All hard wired plug in screw terminals (11 way connector block)

  2 x live in terminals, 2 x live out terminals, 3 x common neutral terminals, 2 x earth terminals 2 terminals unused for safety clearance

  Internal DIL switch:

  2 way switch 1 no function, switch 2 ‘ON’ 10% to 100% dimming, switch 2 ‘OFF’ 1% to 100% dimming

  Dimensions:

  Aluminium powder coated black texture front panel:

  W x H x D (mm) 175 x 100 x 2

  Galvanised steel rear enclosure:

  W x H x D (mm) 170 x 95 x 65

  Overall depth of unit (mm): 67

  Weight:

  Nett 0.9kg

   

  Complies with relevant parts of CE regulations

   

   

• Downloads

  PDF Downloads

  Sales Leaflet >>

  Operating Instructions >>