AMD Fader - 5 Control Options

1 to +10V Analogue Electronic Ballast (Current Sinking)

1 / 2 / 3 / 4 Channel

Linear Law supplied as standard, Square Law can be supplied on request.

0 to +10V Analogue (Current Sourcing)

1 / 2 / 3 / 4 Channel

The analogue version uses the +10V reference supply available from most of the Anytronics range of dimming packs to control between 1 and 4 channels of dimming.

DSI / DALI

1 / 2 / 3 / 4 Channel

The DSI and DALI versions provide from 1 to 4 channels of control for dimming fluorescent ballasts such as those used in our Anycolour system and Anycove overlapping cove lighting system. These systems provide colour controlled lighting and with appropriate choice of lamps can be used for office/retail and commercial lighting projects. In all these situations the AMD panel can be used to provide a local control facility.

The product requires a DC supply between 15 to 25V @ 100mA. Outputs can be on RJ12 socket or screw terminals for either type, please state when ordering. A mains powered version is available to special order.

Low Voltage DMX

1 / 2 / 3 / 4 Channel

The DMX version can be used to control dimming packs, Anycolour systems, and many LED and intelligent lighting systems. The standard start address is 1. External connections are made via an RJ45 connector or screw terminals.

The product requires a DC supply either directly from Anytronics product via RJ45 or on the screw terminals from a separate supply of between 9 to 25V @ 100mA, please state when ordering. A mains powered version is available to special order.

Low Voltage DMX

4 Channel + Master / 6 Channel

Identical to above DMX version but with external connections via RJ45 only.

NOTE: If this is not connected to Anytronics products an Anytronics AS180 power supply with DMX connectors will be required.