DMX to Analogue Interfaces

Convert up to 16 channels of DMX to 0-10V or 1-10V

• Description

  The Anytronics DMX to Analogue interface is designed to accept up to 16 channels of data via the DMX input and to convert the data into an equivalent analogue voltage to control equipment that requires 0-10V or 1-10V control inputs.

   

  • Mains powered 8 or 16 channel DMX to 0-10V or 1-10V (internally selectable) wall mounted interface.
  • 8 channel PCB available separately – requires 15-25V dc supply
  • RJ45 and XLR connectors for DMX in/out
  • DMX addressing via rotary BCD switches
  • Analogue outputs via screw terminals
  • Selectable DMX failure modes

   

  For a comprehensive data sheet and operating instructions go to the downloads tab.

• Basic Specifications

  Contact Anytronics >>

   

• Downloads

  PDF Downloads

  Sales Leaflet >> Contact Anytronics

  Operating Instructions>>

   

3 or 4 Channel DMX to DFB Interface

Convert up to 4 channels of DMX to either DSI or DALI broadcast signals controlling fluorescent, LED or halogen ballasts

• Description

  • Robust mains powered interface in steel case
  • Factory set for either DSI or DALI broadcast output
  • Simple to use RJ12 plug and play connection system for controlling Anycolour fittings
  • 'Blackout' enable/disable feature simplifies use with conventional DMX output lighting desks
  • 5 pin XLR and RJ45 in/through DMX connectors
  • +5 V supply on RJ45 DMX connectors to power Anyscene products, Anycolour Memory unit or Colourdesk 2
  • Holds last output level indefinitely on DMX disconnection

   

  For a comprehensive data sheet and operating instructions go to the downloads tab.

• Basic Specifications

  Contact Anytronics >>

   

• Downloads

  PDF Downloads

  Sales Leaflet >> Contact Anytronics

  Operating Instructions>>

   

32 Channel DMX to DALI Broadcast/DSI Interface

Convert up to 32 channels of DMX to either DSI or DALI signals controlling fluorescent, LED or halogen transformers or ballasts

• Description

  • Mains powered 32 channel DMX to DALI Broadcast / DSI (internally selectable) wall mounted interface.
  • Fully DMX addressable via 3 x 0 to 10 rotary switches
  • DMX mapping, allows interface to be configured as: 32, 16,8 or 4 DMX channels
  • Outputs via RJ12 connectors. RJ12 to 5 way screw terminal PCB (D2510) available for hardwired DALI Broadcast / DSI connections
  • ‘Blackout’ enable / disable feature, via external switch
  • DMX terminator resistor selectable via external switch
  • Minimum fluorescent level preset (MFL)
  • Presettable cut out after time delay feature prolongs lamp life (FCL)
  • 5 pin male and female in/through DMX connectors
  • 2 x RJ45 in/through DMX and +5V connectors for Anyscenes / Anycolour Memory units
  • Selectable DMX failure modes: ‘data hold indefinitely’ (factory set) or ‘data fade to zero after 5 seconds’ selectable via internal jumper plug

   

  For a comprehensive data sheet and operating instructions go to the downloads tab.

• Basic Specifications

  Weight: 1.28 kg

  Dimensions: (H x W x D): 60 x 245 x 120

   

• Downloads

  PDF Downloads

  Sales Leaflet >> Contact Anytronics

  Operating Instructions>>