Lightflo 8x4

Fluorescent soft light designed specifically for the Film & TV industry.

• Description

  • Designed for Blue / Greenscreen and general Cyc lighting
  • High frequency ballasts for flicker-free filming
  • DMX or local control
  • Dimming or progressive switching of tubes
  • Tubes can be controlled individually, alternately or all together
  • Safety coated high output tubes in daylight, tungsten, blue or green
  • Swivel section allows variable spread of light

   

  For a comprehensive datasheet  and operating instructions go to the downloads tab.

• Basic Specifications

  Weight: 15.0kg

  Dimensions: 1355mm (W) x 469mm (H) 162mm (D)

  Horizontal Mounting: 28mm TV spigot

  Vertical Mounting: via snap-fix bracket (accessory)

  Lamp Type: T5 linear fluorescent  HO 54W x 8 pcs

  Ballast Frequency: 50kHz to 100kHz

  Dimming Range: 1% to 100%

  Power Sockets: 1 x male 16A CEE17 plug + 1 x female 16A CEE17 socket for daisy chaining up to 8 units

  Power Supply: 200 to 250V AC 50/60Hz single phase

  Maximum Power Consumption: 450W

  DMX Connectors: 1 x male + 1 x female 5pin XLRs + 2 x RJ45 skts

  DMX Addressing Address range: 1 – 512, set by 3 push button BCD switches

   

  Complies with relevant parts of CE regulations

  598 and EN60598-2-17, and relevant parts of EN61000-6-3 (EN55015)

• Downloads

  PDF Downloads

  Sales Leaflet >>

  Operating Instructions >>

  Dimension Sheet >>

Lightflo 4x4

Fluorescent soft light designed specifically for the Film & TV industry.

• Description

  • Ideal for Blue / Greenscreen and general Cyc lighting
  • High frequency ballasts for flicker-free filming
  • DMX or local control
  • Dimming or progressive switching of tubes
  • Low profile for restricted height applications
  • Tubes can be controlled individually, alternately or all
  • Safety coated high output tubes in daylight, tungsten, blue or green

   

  For a comprehensive datasheet  and operating instructions go to the downloads tab.

• Specifications

  Weight: 7.0kg

  Dimensions: 1355mm (W) x 469mm (H) 162mm (D)

  Horizontal Mounting: 28mm TV spigot

  Vertical Mounting: via snap-fix bracket (accessory)

  Lamp Type: T5 linear fluorescent  HO 54W x 4 pcs

  Ballast Frequency: 50kHz to 100kHz

  Dimming Range: 1% to 100%

  Power Sockets: 20A PowerCon in and out

  Power Supply: 200 to 250V AC 50/60Hz single phase

  Maximum Power Consumption: 450W

  DMX Connectors: 1 x male + 1 x female 5pin XLRs + 2 x RJ45 skts

  DMX Addressing Address range: 1 – 512, set by 3 push button BCD switches

   

  Complies with relevant parts of CE regulations

  598 and EN60598-2-17, and relevant parts of EN61000-6-3 (EN55015)

• Downloads

  PDF Downloads

  Sales Leaflet - please contact Anytronics

   

Lightflo 3x4 UV

Lightweight DMX controlled dimmable UV fluorescent black light specifically designed for effects lighting.

• Description

  • Efficient high output 108W UV effects light
  • High frequency ballasts are compatible with high speed filming
  • Easy to rig and handle
  • Right angled fixing brackets at each end for floor / wall mounting
  • 1.5mm wire safety screen attached to grille
  • DMX control
  • DMX inputs protected to DMX-512 A
  • DMX in and through connections on XLR
  • Thumb wheel DMX address setting without power connected
  • PowerCon in and through power connectors

   

  For a comprehensive datasheet  and operating instructions go to the downloads tab.

• Basic Specifications

  Weight: 10.2kg

  Dimensions: 1444mm (W) x 150mm (H) 130mm (D)

  Mounting: 28mm TV spigot or wall / ceiling mounting bracket

  Vertical Mounting: via snap-fix bracket (accessory)

  Lamp Type: T8 36W BLB UV fluorescent lamps

  Ballast Frequency: 50kHz to 100kHz

  Dimming Range: 1% to 100%

  Power Sockets: 16A PowerCon male input plus through socket for daisy chaining up to 8 units

  Power Supply: 200 to 250V AC 50/60Hz single phase

  Maximum Power Consumption: 80W

  DMX Connectors: 1 x male + 1 x female 5pin XLRs + 2 x RJ45

  DMX Addressing Address range: Address range 1 – 512, set by 3 push button BCD switches

   

  Complies with relevant parts of CE regulations

  EN60598 and EN60598-2-17, and relevant parts of EN61000-6-3 (EN55015)

• Downloads

  PDF Downloads

  Sales Leaflet >>

  Operating Instructions >>